Paper Stock Institute. Guidelines for paper stock. Washington, D.C.: Institute of Scrap Recycling Institute Inc.

Pfeffer, J. 1992. Solid waste management engineering. Englewood Cliffs, N.J.: Prentice-Hall.

Portland Metropolitan Service District. 1993. Waste stream characterization study. Results for fall 1993.

Preston, G.T. 1976. Resource recovery and flash pyrolysis of municipal refuse. Presented at Inst. Gas Technol. Symp., Orlando, FL, January 1976.

Rabasca, L. 1993. Waste from restaurants. Waste Age (March).

Robinson, W., ed. 1986. The solid waste handbook. New York: John Wiley & Sons.

Rugg, M. 1992. Lead in municipal solid waste in the United States: Sources and forms. Edison, N.J.: Camp Dresser & McKee Inc. (June).

San Diego, City of, Waste Management Department. 1988. Request for proposal: Comprehensive solid waste management system. (4 November).

Sanner, W.S., C. Crtuglio, J.G. Walters, and D.E. Wolfson. 1970. Conversion of municipal and industrial refuse into useful materials by pyrolysis. RI 7428. U.S. Dept. of Interior, Bureau of Mines (August).

Santhanam, C.J. 1974. Flotation techniques. Vol. 3 of Environmental engineers handbook, edited by B.G. Lipták. Radnor, Pa.: Chilton Book Company.

Savage, G.M., L.F. Diaz, and C.G. Golueke. 1985. Solid waste characterization. Results of waste composition study in Santa Cruz County, Calif. BioCycle (November/December).

Schaper, L.T. and R.C. Brockway. 1993. Transfer stations. In The McGraw-Hill recycling handbook, edited by H.F. Lund. McGraw-Hill, Inc.

Scher, J.A. 1971. Solid waste characterization techniques. Chem. Eng. Prog. 67 (March).

SCS Engineers. 1991. Waste characterization study, solid waste management plan, Fairfax County, Virginia. Reston, Va. (October).

Seattle Engineering Department, Solid Waste Utility. 1988. Waste reduction, recycling and disposal alternatives: Volume II—Recycling potential assessment and waste stream forecast. Seattle (May).

Snell, J.R. 1974. Size reduction and compaction equipment. Vol. 3 of Environmental engineers handbook, edited by B.G. Lipták. Radnor, Pa.: Chilton Book Company.

Solid waste management: Technology assessment. 1975. Schenectady, N.Y.: General Electric.

Sommerland, R.E., W.R. Seeker, A. Finkelstein, and J.D. Kilgroe. 1988. Environmental characterization of refuse-derived-fuel incinerator technology. National Waste Processing Conference, Philadelphia, 1988. New York: ASME.

Steven, W.K. 1989. When the trash leaves the curb: New methods improve recycling. New York Times, 2 May.

Surprenant, G. and J. Lemke. 1994. Landfill compaction: Setting a density standard. Waste Age (August).

Tchobanoglous, G., H. Theisen, and R. Eliassen. 1977. Solid wastes: Engineering principles and management issues. New York: McGraw-Hill.

Tchobanoglous, G., H. Theisen, and S. Vigil. 1993. Integrated solid waste management. McGraw-Hill, Inc.

---. 1993. Integrated solid waste management: Engineering principles and management issues. New York: McGraw-Hill.

Tuttle, K.L. 1986. Combustion generated particulate emissions. National Waste Processing Conference, Denver, 1986. ASME.

U.S. Environmental Protection Agency (EPA). 1976. Decision makers' guide in solid waste management. 2d ed. Washington, D.C.: U.S. EPA.

---. 1992. The consumer's handbook for reducing solid waste. EPA

Vesilind, P.A. and A.E. Reimer. 1980. Unit operations in resource recovery engineering. Englewood Cliffs, N.J.: Prentice-Hall.

Walsh, P. and P. O'Leary. 1991. Evaluating a potential sanitary landfill site. Waste Age 22, no. 8: 121-134.

---. 1991. Landfill site plan preparation. Waste Age 22, no. 10:

Project Earth Conservation

Project Earth Conservation

Get All The Support And Guidance You Need To Be A Success At Helping Save The Earth. This Book Is One Of The Most Valuable Resources In The World When It Comes To How To Recycle to Create a Better Future for Our Children.

Get My Free Ebook

Post a comment