ORP Measurement

During the chemical reaction shown in Equation 7.42(1), an inert metal electrode placed in contact with the solution detects the solution's ability to accept or donate electrons. The resulting ORP redox potential is directly related to reaction progress. A reducing ion (ferrous) provides electrons and makes the electrode reading more negative. An oxidizing ion (Cr+6) accepts electrons and makes the electrode reading more positive. The resulting net electrode potential is related to the ratio of concentrations of oxidizing and reducing ions in solution.

ORP is sensitive in measuring the degree of treatment provided by the reaction. However, it cannot be related to a definite concentration (only the ratio) and, therefore, it cannot be used as a monitor of final effluent concentration.

Wastewater treatment facilities can theoretically calculate the exact potential to ensure complete treatment, but in practice, this potential is subject to variations in reference electrode potential, pH, the presence of other waste stream contaminants, temperature, the purity of reagents, and so forth. Therefore, they usually determine it empirically by testing the treated wastewater for trace levels of the material to be eliminated. The optimum control point (ORP reading) occurs when just enough reagent is added to complete the reaction. Suggested control points are given later in this section; however, those control points are approximate and should be verified online by sample testing.

ORP instruments are calibrated like voltmeters, measuring absolute mV, although a standardized (zero) adjustment is often available on instruments designed for pH measurement also.

To verify the operation of electrodes, wastewater treatment facilities should have a known ORP solution composition using quinhydrone and pH buffer solutions. These solutions must be made up fresh to prevent air oxidation and deterioration. A more stable ORP reference solution consists of 0.1 M ferrous ammonium sulfate, 0.1 M ammonium sulfate, and 1.0 M sulfuric acid. Its ORP is +476 mV when measured with a silver-silver chloride, saturated potassium chloride reference electrode.

ORP electrodes must have a very clean metal surface. Routine cleaning of electrodes with a soft cloth, dilute acids, or cleaning agents promotes a fast response.

Trash To Cash

Trash To Cash

This book will surely change your life due to the fact that after reading this book and following through with the steps that are laid out for you in a clear and concise form you will be earning as much as several thousand extra dollars a month,  as you can see by the cover of the book we will be discussing how you can make cash for what is considered trash by many people, these are items that have value to many people that can be sold and help people who need these items most.

Get My Free Ebook

Post a comment