To use this analytical expression of organic loading, environmental engineers must collect or assume data on the wastewater to be treated. The concentration of biodegradable organic material is expressed as BOD5. For municipal wastewater, the BOD5 ranges from 100 to 300 mg/l. The volume of wastewater to be treated is based on historical flow measurements plus an estimation of any increase or decrease anticipated during the life of the treatment plant.
The viable microorganisms in the activated-sludge process are expressed in terms of MLSS. MLSS is not the concentration of viable microorganisms but an indication of the microorganisms present in the system. Environmental engineers use the MLSS concentration because measuring the actual number of viable organisms in the system is difficult. The organic loading equation represents the ratio of the weight of organic material fed to the total weight of microorganisms available for oxidation.
Environmental engineers choose the organic loading on the basis of the desired effluent quality. If the organic loading is maintained at a high level, the effluent quality is poor, and solids (excess microorganisms) production is high. As the organic loading is reduced, however, the quality of the effluent improves, and the sludge production decreases. Table 7.25.1 shows the effect of organic loading.
Was this article helpful?