Table 592 Selected Epa Reference Methods

Method 1—Sample and velocity traverses for stationary sources Method 2—Determination of stack gas velocity and volumetric flow rate (type S pitot tube) Method 2A—Direct measurement of gas volume through pipes and small ducts Method 2B—Determination of exhaust gas volume flow rate from gasoline vapor incinerators Method 3—Gas analysis for carbon dioxide, oxygen, excess air, and dry molecular weight Method 3A—Determination of oxygen and carbon dioxide concentrations in emissions from stationary sources (instrumental analyzer procedure) Method 4—Determination of moisture content in stack gases Method 5—Determination of particulate emissions from stationary sources

Method 5A—Determination of particulate emissions from the asphalt processing and asphalt roofing industry Method 5B—Determination of nonsulfuric acid particulate matter from stationary sources

Method 5D—Determination of particulate matter emissions from positive pressure fabric filters Method 5E—Determination of particulate emissions from the wool fiberglass insulation manufacturing industry Method 5F—Determination of nonsulfate particulate matter from stationary sources

Method 6—Determination of sulfur dioxide emissions from stationary sources Method 6A—Determination of sulfur dioxide, moisture, and carbon dioxide emissions from fossil fuel combustion sources

Continued on next page

Method 6B—Determination of sulfur dioxide and carbon dioxide daily average emissions from fossil fuel combustion sources

Method 6C—Determination of sulfur dioxide emissions from stationary sources (instrumental analyzer procedure) Method 7—Determination of nitrogen ox ide emissions from stationary sources Method 7A—Determination of nitrogen oxide emissions from stationary sources Method 7B—Determination of nitrogen oxide emissions from stationary sources (UV spectrophotometry) Method 7C—Determination of nitrogen oxide emissions from stationary sources Method 7D—Determination of nitrogen oxide emissions from stationary sources Method 7E—Determination of nitrogen oxide emissions from stationary sources (instrumental analyzer procedure)

Method 8—Determination of sulfuric acid mist and sulfur dioxide emissions from stationary sources Method 9—Visual determination of the opacity of emissions from stationary sources

Method 10—Determination of carbon monoxide emissions from stationary sources

Method 10A—Determination of carbon monoxide emissions in certifying continuous emission monitoring systems at petroleum refineries Method 11—Determination of hydrogen sulfide content of fuel gas streams in petroleum refineries Method 12—Determination of inorganic lead emissions from stationary sources Method 13A—Determination of total fluoride emissions from stationary sources (SPADNS zirconium lake method)

Method 13B—Determination of total fluoride emissions from stationary sources (specific ion electrode method) Method 14—Determination of fluoride emissions from potroom roof monitors of primary aluminum plants Method 15—Determination of hydrogen sulfide, carbonyl sulfide, and carbon disulfide emissions from stationary Method 15A—Determination of total reduced sulfur emissions from sulfur recovery plants in petroleum refineries

Source: Code of Federal Regulations, Title 40, part 60, App. A.

Method 16—Semicontinuous determination of sulfur emissions from stationary sources Method 16A—Determination of total reduced sulfur emissions from stationary sources (impinger technique) Method 16B—Determination of total reduced sulfur emissions from stationary sources

Method 17—Determination of particulate emissions from stationary sources (instack filtration method) Method 18—Measurement of gaseous organic compound emissions by GC Method 19—Determination of sulfur dioxide removal efficiency and particulate matter, sulfur dioxide, and nitrogen oxide emission rates Method 20—Determination of nitrogen oxides, sulfur dioxide, and oxygen emissions from stationary gas turbines Method 21—Determination of VOC leaks Method 22—Visual determination of fugitive emissions from material sources and smoke emissions from flares Method 24—Determination of volatile matter content, water content, density, volume solids, and weight solids of surface coating Method 24A—Determination of volatile matter content and density of printing inks and related coatings Method 25—Determination of total gaseous nonmethane organic emissions as carbon Method 25A—Determination of total gaseous organic concentration using a flame ionization analyzer Method 25B—Determination of total gaseous organic concentration using a nondispersive infrared analyzer Method 27—Determination of vapor tightness of gasoline delivery tank using pressure-vacuum test Appendix B—Performance Specifications

Performance Specification 1—Perfor-mance specifications and specification test procedures for transmissometer systems for continuous measurement of the opacity of stack emissions

Performance Specification 2—Specifi-cations and test procedures for SO2 and NOx continuous emission monitoring systems in stationary sources

Performance Specification 3—Specifi-cations and test procedures for O2 and CO2 continuous emission monitoring systems in stationary sources

FIG. 5.9.2 Sampling train.

Was this article helpful?

0 0

Post a comment